Manual Crimper
Brand:CABLEGIA
Crimp Style:Four-indent Eight-impression
Material:Mould Steel
Selector Numbers:8
Through hole Diameter:mm
Dimensions:mm
The new AFM8 frame tool will be released soon!
Suitable with AS22520/1-01 Standard crimp tool.
Compatiable to MIL-DTL-22520/2* and AS22520/2*, the AFM8 is designed for most of the miniature and sub-miniature connector types that are so widely used in electronic systems. The AFM8 meets the need for a miniature tool accommodating wire sizes 20 through 32 AWG.
The AFM8 gives a Mil-Standard 8 impression crimp, which assures maximum tensile strength. The cycle controlled precision ratchet assures consistently accurate crimps every time. The tool frame has a built-in 8 step selector knob for ease in dialing the correct crimp depth setting for the wire being used.
Positioners adapt the tool frame to a particular application. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioner is easily removed and changed.
Periodic gaging is recommended to insure accurate calibration. This is easily accomplished with the M22520/3-1 “GO/NO-GO” gage (part no. G125) on SEL setting #8. The AFM8 is 6 3/4" in length and weighs approximately 10 oz.
Other than keeping the tool clean and properly stored when not in use, no operator maintenance is required.
| AFM8 GAUGING LIMITS OF INDENTERS 20-32AWG(0.52-0.032mm2) | ||||||
| SEL. | INSPECTION GAUGE(MM/IN) | |||||
| GO | NO-GO | |||||
| NO. | AWG | mm | in | mm | in | |
| 1 | 0.33 | 0.013 | 0.46 | 0.018 | ||
| 2 | 0.41 | 0.016 | 0.53 | 0.021 | ||
| 3 | 0.48 | 0.019 | 0.61 | 0.024 | ||
| 4 | 0.56 | 0.022 | 0.69 | 0.027 | ||
| 5 | 0.66 | 0.026 | 0.79 | 0.031 | ||
| 6 | 0.76 | 0.030 | 0.89 | 0.035 | ||
| 7 | 0.86 | 0.034 | 0.99 | 0.039 | ||
| 8 | 0.99 | 0.039 | 1.12 | 0.044 | G125 M22520/3-1 | |
If you encounter difficulties in using the tool or if the tool is getting stuck by using terminals that exceed the applicable range, please contact sales@cablegia.com, we will guide you on how to use the tool correctly and eliminate the difficulties.
Limited Warranty / Limitation of Liability*
Cablegia tool manufacturing warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. Cablegia’s obligation under this warranty is limited to the free correction or, at Cablegia's option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to Cablegia with all transportation charges prepaid, and which shall appear to Cablegia's satisfaction, upon inspection by Cablegia, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Cablegia tool manufacturing, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Cablegia, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the Cablegia product selected for the specific requirements of each particular application. Cablegia is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Cablegia is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of Cablegia products assume full responsibility for instructing their employees in the proper and safe use of such products.
1 year warranty for crimp tool and 5 years warranty for tool positioner are availaible.
Returns
Material returned must be standard items produced by Cablegia, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
Return credit must be offset by a purchase order for new Cablegia product on a dollar for dollar basis.
Contact sales@cablegia.com
